One of the modern types of car tuning is the installation of additional interior lighting. The standard illumination of the instrument panel and the bright rim of the included cigarette lighter were replaced by new LED illumination, both of individual panels and the entire interior of the car.
It is necessary
- - LED Strip Light;
- - LEDs;
- - double sided tape;
- - nylon ties.
Instructions
Step 1
To make the interior of your car exclusive and modern, you can try to change it with additional lighting, using LED bulbs and strips. Due to the fact that LEDs are practically unique in terms of low power consumption, they can be installed in any place, they consume very little electricity and therefore can be used in unlimited quantities.
Step 2
LED lighting can not only transform the interior, completely changing its color, but also give uniqueness by mixing and overlaying several colors. The LEDs can be installed at your discretion as illumination of buttons, pedals, gear knob, around the ignition switch. The biggest aesthetes install lighting on door handles and pockets, as well as on floor mats.
Step 3
To install such a backlight, you first need to measure the length of all sections of the wiring, and then collect the wiring. Then we connect to the plafond. You can connect not only to the wires, but also to the light bulb itself.
Step 4
The backlight will light up as soon as the center lamp of the front courtesy light comes on. For completeness, the backlight can be replaced with standard bulbs. So, for example, install diodes in both lampshades of the interior light.
Step 5
If you decide to make the interior lighting, but do not want radical changes, try to start by simply replacing the incandescent bulbs in the standard instrument panel lighting with LEDs. Thus, with minimal cost and risk, you will immediately see an amazing effect.
Step 6
If you doubt that you can handle a customized salon with your own hands, then at present, various tuning ateliers offer services for installing the interior lighting. These ateliers use high quality materials and modern tuning technologies.
