The braking efficiency of domestically produced cars, on which, as a rule, a combined brake system is installed: the front axle is equipped with brake discs, and the rear axle is equipped with drums, is significantly lower compared to imported cars equipped exclusively with disc brakes with ABS.
It is necessary
a set of disc brakes for the rear axle
Instructions
Step 1
It is noteworthy that our Russian car industry has developed and tested a disc brake system for the VAZ 2112, but for some unknown reason, Togliatti refused to introduce the development into mass production, and continue to produce cars with an outdated brake system.
Step 2
True, the production of sets with brake discs continues to be carried out in small batches both at VAZ and other manufacturers. …
Step 3
After purchasing the required kit, the vehicle is placed on a level surface. With the help of a jack, the rear of the machine is mounted on rigid supports, and from the rear axle, the following are dismantled: brake drums, pads, parking brake mechanisms, hydraulic brake working cylinders and supporting discs.
Step 4
Each set of disc brakes designed for the conversion of the rear axle of a car contains detailed installation instructions, after studying which, the parts from the purchased kit are sequentially installed by the master in the required places. As a rule, such a modernization of the brake mechanisms does not cause any complications for anyone.
