The on-board computer can be safely called a faithful driver's assistant, because he knows everything and can prompt in time, but from time to time it has to be reconfigured. Moreover, sometimes situations arise when it is required to change the parameters from "zero".
Necessary
car user manual
Instructions
Step 1
The first step is to take a close look at the handle, with the help of which the windshield wipers (wipers) present in each car are controlled. In the end part of the handle there are control elements of the BC (on-board computer). One of these elements can be called a function switch, and the second is Reset. This part is a button for zeroing, as well as resetting all data of the on-board computer.
Step 2
In the on-board computer menu, select BC 1 or BC 2. These readings can be reset individually to allow a comparison of data over a period of time.
Step 3
Now you need to turn on the ignition. First you need to press Reset, then try to hold this button for at least two seconds. Select AH values from the menu. Thus, you set the meters of the average and absolute fuel consumption to zero and at the same time the average car speed and the amount of driving time.
Step 4
Reset to zero all data contained in the on-board computer. After that, the display should show the line - - -. Having done this, it is necessary to fix the Reset with one short press.
Step 5
In the same way, you should reset the indicators, which serve as a signal that it is time to refuel.
Step 6
Reset absolutely all data of the BC (on-board computer). Disconnect the battery terminals. After that, you should wait a while - at least 10 minutes.
