Sony radio tape recorders, with high-quality sound, will not let the driver get bored on the road. If you need to update the firmware or find out the serial number of the system, you must remove it from the socket.
Necessary
- - radio tape recorder
- - two / four special keys
- - two / four thin plates
Instructions
Step 1
The latches that hold the Sony radio in the basket are located in the depth, on four sides around its perimeter. In order to see the grooves where you need to enter the keys, remove the frame from the panel with your hands.
Step 2
Insert the special keys into the grooves in the corners of the radio. Enter them carefully, all the way. This must be done in order to squeeze out the stoppers that hold the system.
Step 3
The stopper does not react immediately. To release them, wiggle and twist the keys in space until you hear a characteristic click. This action may take some time (from 30 minutes to several hours), please be patient.
Step 4
Remove the protective cover on the passenger side, reach with your hand to the back of the radio and push it down. If you feel that, after releasing the stoppers, it is freely located in the basket, then pull it towards you. If the previous steps are performed correctly, the radio tape recorder will easily come out.
Step 5
Removal keys are included with the radio. If they are not there, then you can use any items. The main thing is that they are flat, long and made of metal. the plastic may break. For example, tin plates, wires, knives, knitting needles. When choosing, keep in mind that the length of a standard key is 8, 5 cm, and its width is 8 mm.
