Car wipers must meet a number of requirements: to provide uniform pressure, elasticity, resilience, frost resistance. Sooner or later, the wipers become unusable and need to be replaced. To do this, you need a minimum of tools and knowledge.
Necessary
Minimum set of keys
Instructions
Step 1
Take a wrench that matches the wiper mount, usually a 10mm wrench. After pushing back the protective cap on the wiper mount, unscrew the nut and remove the wiper from the cone. Not infrequently there are slots on the cone that make it difficult to remove the wiper. In this case, to remove, use a large screwdriver, carefully picking up, remove the old wiper, be sure to remember its position on the windshield.
Step 2
Place the new wiper on the cone, in the same position as before removal. Put the spring washer on the stud, screw on the nut and tighten it. Tighten very carefully so as not to break the threads, otherwise it will be impossible to fix the wiper.
Step 3
Do the same with the second wiper, and if necessary, with the rear window wiper.
Step 4
At the final stage, turn on the wipers and follow the trajectory of movement. The wipers should work evenly without touching anything.
