With the development of the auto industry and the introduction of new technologies, there are many opportunities for tuning and finalizing the car. Since it is cheaper to modify your old car to the required power than to buy a new, more powerful car.
Instructions
Step 1
The most common way to increase engine power is by adjusting the compression ratio. In this case, the surface of the head is processed or the gasket is simply changed. According to simple laws of physics, it is clear that the more combustible mixture is supplied to the combustion chamber, the higher the engine performance will be. This can be achieved by enlarging the intake and exhaust valve discs and by adjusting the valve timing. Since we are talking about the combustible mixture, it is worth saying that you can simply install a different carburetor, but all the physical aspects of the engine must be taken into account.
Step 2
Also, quite often, "craftsmen" resort to banal boring of the cylinder block and an increase in engine displacement. Many still install a lightweight flywheel and a zero resistance filter on such a motor. A common installation is a turbocharger that supplies air under pressure. This installation requires engineering skills and knowledge of the design of motors, as you cannot just pick up and install. Each brand of car requires a certain technical approach. Also, this installation significantly hits the pocket, but on the other hand, the power increases noticeably. Another way to increase engine power is chip tuning, i.e. firmware of the program of the electronic control unit due to which the acceleration of the car increases.
Step 3
And how to increase the performance of the motor without affecting it? For this, it is possible to modify the gearbox, since the torque generated by the engine is transmitted through the gearbox. For better dynamics, the transmission should allow the engine to run longer in the power-torque zone. This is achieved by converging the gear ratios of each gear. It is also possible to significantly increase the transmission of torque by installing a self-locking differential, which will rotate both wheels and prevent one of them from slipping.
Before you start tuning the engine, it is worth considering the fact that all these improvements are affordable so that they have a good value. Fuel consumption will also increase significantly. Well, and most importantly, the maintenance of your car will be much more expensive than the factory version of your car.
