When the speedometer needle oscillates on the dashboard while driving in the car, and the speed of movement cannot be accurately determined, the responsibility for such "behavior" of the device lies, as practice has shown, in most cases on the faulty speed sensor.
Necessary
- - 17 mm spanner;
- - new speed sensor.
Instructions
Step 1
Failure of various electrical devices in the electrical equipment of a car is by no means uncommon, and the speed sensor will be no exception. It is also susceptible to damage like all other electronic devices.
Step 2
Probably, many will agree that driving with a faulty speedometer is quite problematic. And taking into account the number of surveillance cameras for traffic and the size of modern penalties, it is also quite ruinous.
Step 3
To carry out the upcoming repair, you need to visit a car dealer and purchase a new sensor. Then raise the hood of the car and find the installation location of the specified device, which is located in the rear cover of the gearbox.
Step 4
The electrical connector is disconnected from the sensor by squeezing the latches with your fingers and moving the block up.
Step 5
Then you need to unscrew the faulty sensor, and screw in a new part in its place.
Step 6
Having spent a total of just a few minutes of personal time, you can continue driving as usual.
