Window tinting is performed by all vehicle owners with pleasure. Tinting not only gives the car an elegant appearance, but also protects the interior from rapid heating, burnout, penetration of UV rays.
If the windshield is tinted correctly, then glare can be excluded, and this, in turn, reduces the likelihood of an accident. And thieves will not be able to see the objects that are in the cabin through the tinted glass. Glass tinting is performed in any salon.
But if you need to remove the tinted glass, then you can either go to the salon or do it yourself. Of course, when contacting the salon, the car owner will be deprived of all the problems associated with this procedure. After all, the salons have all the necessary equipment and tools that will help you remove the film without a trace.
If you use your own strength to remove the film, then you need to be extremely careful. Direct removal of the film from the glass does not cause any difficulties for the car owner. The film always comes off the glass very quickly and easily. But after removing the film, you can see the remnants of glue on the glass, which must also be removed. Therefore, it is possible to remove the tinted glass efficiently only with the use of special devices. These include a knife that has a very sharp blade. When removing the film, they need to very carefully pry the edges of the film and remove it. This procedure must be performed all at once, without damaging the film itself. You can use a regular hair dryer to help make the adhesive base softer. As a result, the process of removing the film will be greatly facilitated. But here you have to be extremely careful. The hair dryer must not be allowed to operate at maximum power. In this case, you can damage the foil that is on the film. In addition, the hair dryer should not be allowed to be close to the glass. It is optimal if the hair dryer is located at an angle of 40-45 degrees.