How To Decode A Radio Tape Recorder

Table of contents:

How To Decode A Radio Tape Recorder
How To Decode A Radio Tape Recorder

Video: How To Decode A Radio Tape Recorder

Video: How To Decode A Radio Tape Recorder
Video: How to upgrade your old cassette / tape deck ||connect AUX cable in Radio #PHILIPS 2024, June
Anonim

The radio recorders built into most modern cars are encrypted against burglary. After the car network is de-energized for at least 10 minutes, or the terminal is accidentally removed by you, your radio will ask you to enter a four-digit code. Of course, when buying a new car, you will be given a card with a code. But what if the card was lost, or it was not there at all?

There are two ways to decode a car radio. Which one to choose, decide for yourself
There are two ways to decode a car radio. Which one to choose, decide for yourself

Instructions

Step 1

This option is simple and expensive: we come to the dealer, he tells us the code. Another thing is that he will not do this for free. In addition, you will also have to pay for the removal and installation of the radio. For an average foreign car, such an operation costs from 3000 rubles.

Step 2

You can resort to an alternative, cheap method. The mountings on many foreign cars are the same. Remove the top cap, unscrew the top screws. Remove the bottom cap and unscrew the bottom screws.

Step 3

We pull out the radio tape recorder until we can see the serial number on it without disconnecting the wire. We rewrite the number on a piece of paper. Do not forget to check the radio model and its manufacturer.

Step 4

On the Internet, we are looking for a calculator for our specific radio model, focusing on the manufacturer of the radio and its model. Now we enter the serial number into the calculator, and the program calculates the code for us.

Step 5

Now we just have to enter the received code into the radio tape recorder, and we can again enjoy our favorite music while sitting in the car. Searching for a calculator on the Internet and performing the procedures for removing and installing the radio tape recorder should take us only about 40 minutes. And I'm not talking about a few thousand rubles that can be saved if you use the second method.

Recommended: