The Peugeot 308 opens up a new generation of Peugeot cars in the third series. This is one of the most popular models in the French car industry. The technical characteristics of the car will conquer even a sophisticated driver. Peugeot 308 will be an ideal purchase among similar representatives of the golf class. However, there is one small flaw in this car - the removal of the battery. In the operating instructions, little is written about this and is not very clear, and its removal is sometimes simply necessary. Let's try to figure it out.
Instructions
Step 1
Open the hood, take a look at the battery. The hardest part is removing the plastic cover. Carefully remove the red cover from the fuse box by disengaging the cover latches on the bottom and on each side.
Step 2
Now remove directly the fuse box itself. Press the right latch with a screwdriver, and at the same time pick it up from below, then everything will go smoothly and quickly.
Step 3
Loosen the clamp on the air intake, and press the fastener from the bottom on the right side. Remove the air intake. After that, proceed to the most difficult thing - detach the casing.
Step 4
Find the latches that are on the sides of the bottom. Do not press on them or try to snap them off like clips, otherwise they may break off or break the attachment points of the casing. Pull them gently upward at a 45 degree angle.
Step 5
Unscrew the battery fasteners, which is a very laborious work, for this take a tubular wrench 12. After the fastening bolts are removed, disconnect the negative wire from the terminal, and carefully remove the battery. Please be patient and do not make sudden movements, everything should go smoothly.
Step 6
Carry out the installation in the reverse order, paying attention to clearly fall into the grooves of the cover fixing, otherwise it will dangle.
