The more cars appear on the roads, the more difficult it is for beginners to learn to drive confidently. The main thing is to learn, not to lose self-control and to be extremely concentrated, no matter what situations arise during the movement.
From the first day of driving lessons, you must carefully familiarize yourself with the driver's seat. Set up the driver's seat in the most comfortable position for the driver, remember the location of the pedals and basic elements used directly when driving. After the student gets behind the wheel, he immediately develops an algorithm of actions for himself before starting the movement: starting the engine and studying the readings of all instruments.
A great difficulty for a beginner is such an action as getting under way. Despite the fact that experienced drivers, this moment passes almost imperceptibly, because over time it comes to automatism, like many other elements of driving. Here is an approximate algorithm of actions for starting the movement:
Start the engine and look at the readings on the instruments. Remove the car from the hand brake and put the gearshift lever in 1st gear.
Depress the clutch pedal all the way and begin to release it smoothly, while being ready to stop and hold it on the weight at the moment when the car starts to move. Wait about 5 seconds and release to the end.
Then, when the work with the clutch pedal has been worked out, the gas pedal is introduced. After the leg is fixed in the air on the clutch, the gas is pressed. When the tachometer readings reach 1500-2000 rpm, the clutch pedal smoothly returns to its original position.
To learn how to get under way and not stall, you need to repeat these exercises many, many times. To brake, you must release the gas and press the clutch pedal all the way and move your foot to the brake, brake smoothly until it stops.
It is very important to learn how to easily control the steering wheel, without straining at the moments of turning. When turning, one hand rises up with the steering wheel, and the second at this moment releases the steering wheel and hovers over the working hand, if you need to make a deeper turn, then it simply intercepts the steering wheel and continues to rotate it. Although the manner of turning the steering wheel can be individual for each driver, the main thing is that everything is clearly worked out.
After that, you can try to start driving itself. To move in different speed modes, it is necessary to use the gearbox gearbox. Initial acceleration is carried out in first gear to about 20 km / h, then to increase speed, the clutch is squeezed out and the gas pedal is released. The gearbox is set to the 2nd gear position and by means of the gas pedal the acceleration is carried out to somewhere up to 40 km / h, in the III gear position the acceleration is up to 60 km / h, and on IV from 50 km / h to the maximum speed. Under these conditions, the engine will operate at approximately the same speed (2000-2500 rpm) and will not overheat or stall.
