All locks are invented for honest and decent people, and it is not difficult to open them for an intruder. And the unexpectedly broken cable for the drive of the locking device of the engine compartment confused many drivers.
It is necessary
- - screwdriver,
- - pliers.
Instructions
Step 1
For trifles, none of the drivers opens the hood of the car. There must be good reasons for this. And if they arose, and even more unexpectedly, yes, as luck would have it, at the most inopportune moment - instead of opening the lock, a characteristic sound of a cable break was heard, followed by a free movement of the lever designed to open the desired lock. The situation, frankly speaking, is unpleasant.
Step 2
But not everything is as tragic as it seems at first glance. A cable break occurs quite often in cars of the "classic line" of the Volzhsky Automobile Plant. And it happens in the same place. One gets the impression that such a breakdown is a consequence of the manufacturer's defects.
Step 3
If a motorist has suffered such a nuisance, it is necessary to get out of the car, bend over and remove with pliers from under the front panel of the passenger compartment, below, on the left, the cable that has come off the hood opening lever. Examine it and try to pull the steel wire inside the braid towards you with pliers. Perhaps luck will favor you, and access to the engine compartment will open.
Step 4
The second option for overcoming the problem is that it is necessary to remove the left plastic grille of the outside air flow into the passenger compartment using a screwdriver from the hood. Dismantling it carefully, and sticking your hand into the opening formed, you need to grope for the cable there and pull it towards you. As a result of the manipulations done, the hood will open.
