It often happens that minor repairs to the car's coating are not enough. The paint is aging, does not perform protective functions, a mesh or cobweb of cracks appears, and the presentation is lost. In general, a complete paint job is required. To do this, you need to know how to breed car paint.
It is necessary
Auto paint, thinner, "Sadolin", dishes for paint dilution, wooden stick for stirring
Instructions
Step 1
It should be remembered that painting a car is done after a number of preparatory work. The machine must be thoroughly washed and dried before painting.
Step 2
Any paint is applied in two layers. The first layer is called the developing layer, all surface defects are clearly visible on it. To thin the paint for the first development layer, take 4 parts of thinner and one part of Sadolin. Stir the mixture thoroughly. For the first painting of the outer surface of the body, 1 liter will be enough. Learn that immediately before painting, the body surface must be thoroughly degreased and dried again.
Step 3
Apply the paint with a regular household vacuum cleaner. Remove the dust filter from it, connect the spray gun and hose. Pour 100 grams of spray adjustment solvent into the reservoir of the vacuum cleaner. In this case, the paint should be sprayed without splashing, evenly, and the torch should be vertical. After adjusting, pour the diluted paint into the tank and apply the first coat. First paint the boxes, door openings along the sealed areas, then the main area.
Step 4
Apply the paint in quick horizontal strokes from top to bottom. This will make it easier to avoid smudges. Do not worry if there are minor gaps somewhere - this is only the first layer, it is much thinner than the main one. The paint should dry well within 20-30 minutes.
Step 5
While the paint is drying, prepare the solution for the next coat. The second layer is called decorative, so the paint should be a little thicker. Dilute it with three parts by volume of solvent and one part of Sadolin. Stir until completely homogeneous. Apply the base coat in the same way as the developing coat - quickly and efficiently. After painting, leave the car in a closed garage for 2-3 days.
Step 6
Use 646, 647 or 648 thinners to thin the paint. Note that the higher the number, the thicker the solvent, and this is an additional opportunity to make more smudges.
