How To Clean Injectors

Table of contents:

How To Clean Injectors
How To Clean Injectors

Video: How To Clean Injectors

Video: How To Clean Injectors
Video: Cleaning Dirty or Clogged Fuel Injectors - DIY Without Using Expensive Equipment 2024, November
Anonim

Manufacturers produce nozzles with a high class of accuracy of fitting parts. Therefore, flushing of such mechanisms is a very important event, which is recommended to be performed at the stand in a specialized car service. However, practice has shown that self-rinsing of nozzles on our own is in no way inferior in quality to a professionally rendered service.

How to clean injectors
How to clean injectors

Necessary

  • - a tray or small basin,
  • - washing powder 100 g,
  • - water 3-5 l,
  • - ultrasonic washing machine,
  • - electrical wires 4 m.

Instructions

Step 1

During preliminary preparation, 100 grams of washing powder is diluted in hot water heated to 90 degrees. The working solution is poured into a tray, into which the nozzles previously removed from the engine are placed.

Step 2

After that, an ultrasonic washing machine is placed in the bath, which is connected to the electrical network.

Step 3

For the best efficiency of the cleaning procedure, the injectors are connected with electrical wires to the turned on turn relay.

Step 4

The duration of the process of cleaning the nozzles depends on their contamination and usually lasts for two to three hours.

Recommended: