In the everyday life of a VAZ 2106 car owner, situations sometimes arise in which it is necessary to remove the rear lights. Such a desire may be associated, for example, with the restoration of the car body. Or with tuning the car, when the owner decided to install "designer" lights.
Necessary
- - 7 mm spanner
- - 8 mm spanner
- - screwdriver
Instructions
Step 1
To dismantle the rear light, you must do the following: open the luggage compartment and unscrew on the right side the self-tapping screws for the plastic casing of the fuel tank, two at the top and one at the bottom - under the mat.
Step 2
Remove the spare wheel from the trunk, and then unscrew the five self-tapping screws of the plastic cover of the rear body panel from the top, and then another one located below.
Step 3
Remove the rear cover from the trunk and remove the bulb holder from the license plate light, then unscrew the two screws and remove the license plate light.
Step 4
Unscrew the four nuts and remove the tail light from the body.
