Currently, the scooter is becoming an integral part of the city, because this vehicle is available to everyone, easy to use and comfortable to ride. Many drivers of these "stools" are not satisfied with the fact that they have to drive a scooter without music. But the installation of soundtrack for this type of transport does not take much time. When installed correctly, music takes up almost no space and is a great addition for mini scooter owners.
Instructions
Step 1
Purchase the necessary equipment for installation: speakers, an amplifier that will not "eat" a lot of energy, a two-wire wire, a toggle switch to turn the amplifier on or off, a motorcycle battery and a player or telephone as a sound source.
Step 2
Remove the trim panels from the scooter: moldings, seat, battery compartment roof. Now they will not interfere with the installation. Remove the original battery and install the motorcycle battery. Place the amplifier in the vacant compartment and bring all the necessary wires outside.
Step 3
Install the largest speaker under the beak cover, attach it to the steering fork with a regular solid wire, then take the wires from it to the amplifier and connect them. In the same way, you can connect a bunch of speakers, but it is better to limit yourself to one or two, otherwise the battery will quickly drain.
Step 4
Find old headphones to connect your music source to the amplifier's input cable. Route the cable into the trunk or front pocket. Power up the amplifier, remove the negative wire from the compartment, and connect it to any metal place in the case.
Step 5
Bring the "plus" from the compartment to the toggle switch contact. On the other contact, bring "plus" from the amplifier. Also make an indication that the amplifier is on, so as not to forget to turn it off. To do this, connect any LED or unnecessary indicator, such as the low oil indicator, to the toggle switch. When the amplifier is on, the lamp will now always be on.
