There are three main types of camouflage colors: camouflage with sharp and clear edges, camouflage with blurred edges of spots, camouflage with the image of reeds, grass, leaves, etc. In terms of execution, the latter type is the most difficult and expensive due to the need to use a plotter.
It is necessary
- Plotter and film for him.
- Airbrush and paint.
- Varnish.
Instructions
Step 1
Choose the type and color scheme of your camouflage. It can fit, for example, under your favorite jacket. Determine which colors will be on the bottom, which on the top and the order of staining.
Step 2
Prepare the car body for painting (degrease, prime). Paint in the base color (the color of the bottom spots). Use nitro paint - it dries quickly. Cut the plotter film in advance. Choose a low-quality Chinese film - it sticks poorly and leaves almost no marks after peeling. After thoroughly drying, apply plotter film in random places. The approximate drying time for nitro paint is 15-20 minutes.
Step 3
Apply a medium coat of paint of the chosen color. After drying, another layer of film. Then - the final layer. Peel off all the pasted film after the paint has dried. The resulting three-color camouflage pattern can be improved. To do this, soften the edges of the spots with an airbrush. In this case, you can add a fourth and fifth color. At the end of the work, apply varnish.
Step 4
For camouflage with vegetation, cut grass, leaves, or reeds on a plotter. First of all, apply blanks, for example, grass and paint the car in the color of the grass. Then apply the reed blanks and paint the car the same color as the reeds. After - in the same way with blanks of leaves. Finally, the background color. Remove the film and apply shadows at the intersection of the elements. At the end - varnish. If you do not have a plotter, you can use masking tape. But this method is more time consuming.
Step 5
Don't use too small camouflage spots. For example, on a small SUV, five large spots will suffice. Do not use more than four colors of paint. It is better to create several shades with the available colors. Camouflage coated with matte varnish looks better.