When the car battery is disconnected, it becomes necessary to enter the code into the car radio. It's simple if the code is written in a special place or the instruction is saved with a sticker. But there are situations when there is no code.
It is necessary
- - radio tape recorder,
- - serial number of the radio,
- - a computer,
- - a special program,
- - metal pins,
- - VIN number of the radio,
- - documents for the car,
- - telephone.
Instructions
Step 1
If the car radio is native, then you can contact an official dealer center. You will need to provide documents for the car. It is possible to find out the code by phone. Then they will clarify your data and ask you to give the VIN number of the radio.
Step 2
Otherwise, remove the radio from the slot. This can be done using four metal objects by pressing them around the perimeter of the system.
Step 3
Examine the machine carefully. Sometimes the code is written down and glued to the body of the radio, so as not to forget. Maybe you have done the same.
Step 4
If the code is not written on the case, find the sticker where the serial number of the radio is indicated. It consists of numerous combinations of numbers and letters of the Latin alphabet. Write it down.
Step 5
Download and install on your computer one of the programs for generating car radio code. Start it up. Enter the serial number of the device in the special window. Wait for the program to display the code on the screen.
Step 6
Install the radio in the car, turn it on. Very carefully enter the unlock code received from the program. Depending on the type of radio, you have from 3 to 10 attempts. Verify the recorded and entered codes. If they match, confirm your entry. The radio tape recorder will start working.
Step 7
Write down the received code in a safe place. For safety reasons, it is not recommended to indicate the code on the radio cassette.
