For those who spend a lot of time driving their own car, the microclimate in the car is very important. Therefore, it is imperative that the stove functions properly. But what if you need to repair it? In a car service, you will be asked for an impressive amount for this procedure, therefore, if you are confident in your abilities, and the warranty period for servicing the car has ended, it is best to repair the stove with your own hands.
Instructions
Step 1
Choose a place where you will dismantle the stove. A garage is best suited for this purpose; you can also use a place under an awning or roof. The area must be level for the vehicle to stand firmly on it. Open the hood and remove the negative terminal from the battery to prevent a short circuit in the electrical circuit. Now move the driver and passenger seats back as far as possible.
Step 2
It is necessary to remove the car's torpedo. To do this, you need to remove all plugs and decorative elements. The panel is fastened with screws under the plugs and with plastic clips. Remove the steering wheel as it will interfere with the removal of the panel. To do this, detach the upper steering wheel cover and unscrew the fastening screws. Unscrew the center nut and carefully remove the handlebar. Now find all the screws that hold the torpedo and unscrew them. Now only plastic clips hold the torpedo. Unfold them and gently pull them out towards you. Disconnect all wires and remove the torpedo from the passenger compartment.
Step 3
Under the torpedo, you will see a stove block and air ducts attached to it. Carefully disconnect all hoses and air ducts that are secured with clamps. Please note that the clamps may be disposable. Now set the wipers upright and unscrew the mount holding them. After that, you will see several screws with washers that hold the stove block from the back. Unscrew them and take out the stove.
