Often the owners of "sixes" like to diversify their car. Put alloy wheels, install a spoiler. Almost every second car enthusiast has a windscreen over the glass. However, after installing such a visor, it is impossible to open the window. And the very meaning of using this device has long been lost. It's time to remove the window on the VAZ 2106 car.
Necessary
- 1) Glass of the car VAZ 2105;
- 2) Guides VAZ 2105;
- 3) Elastic bands;
- 4) Bulgarian;
- 5) Screwdriver;
- 6) Corners (possible with a rear-view mirror);
- 7) File;
- 8) Pliers.
Instructions
Step 1
Purchase glass of a VAZ 2105 or 07 car. This is necessary in order to close the space that is formed as a result of the disappearance of the window leaf. As a result, your glasses will become similar to those of the VAZ 2105-07 car.
Step 2
Remove the window. To do this, you need to unscrew the screw on the stand. Open the door and look at the top of the window mount, you will see the screw you need. Use a Phillips screwdriver. After that, you need to cut the rack with a grinder. Next, remove the window itself along with the rubber bands. Looking inside the door, you will see a support, which also needs to be removed. It is quite difficult to do this with a grinder, so use a file. When finished, level the area well according to the thickness of the glass hole. Otherwise, it will jam.
Step 3
Disassemble the door panel. It is held in place by three screws on the door handle and power window. Next, bend the guide and take out the glass through the hole at the bottom of the door. Remove the old guides. This can be done with a screwdriver and pliers. To do this, turn it by the edges of the guide with a screwdriver, and pull it towards you with pliers. Then add new guides. Lower the glass over the top and install it into the grooves of the guide. Proceed with caution, otherwise the windshield may be scratched.
Step 4
Connect the power window cable through the blocks to the guide. Check the rise and fall of the windshield. … It should be light and easy to move. Otherwise, it is necessary to change the cable, or check how directly the new glass is placed. Collect the door panel. Now insert the corner. Press it as tightly as possible. Insert the rubber bands into the grooves in the windshield. Lift up the glass. Its edge should fit exactly into the corner. Now your window is in the past.
