The overpass is one of the elements of the roadway. It is a bridge that crosses the road going straight, and allows the driver to move off the given carriageway or change the direction of travel.
Instructions
Step 1
To enter the overpass, it is necessary to rebuild in advance to the extreme right lane, respectively, of the markings. At the entrance to the flyover, there will be a sign “Driving straight or left” (4.1.6.) Or “Avoiding an obstacle to the right or left” (4.2.2.).
Step 2
The entrance to the overpass is a rounded road enclosed by dividing fences, mainly with one-way traffic and two lanes.
Step 3
To correctly enter a curved road, you must slow down and engage a lower gear. The speed limit is determined by the steepness of the bend, road irregularities, weather conditions. Select the required speed before entering the turn.
Step 4
When approaching a bend, keep to the right, when entering a bend, move the car to the outside of the lanes. Before turning the wheels, shift the center of gravity forward by sharply throwing the gas or slowing down stepwise. You cannot enter a turn while braking.
Step 5
After entering the corner, start accelerating. You need to counteract the centrifugal force and get the car out of the corner. Plus, you are driving uphill on a slope, which means you need to pull the car up using speed.
Step 6
At the exit from the rounding there will be a “Yield” sign (2.4). You need to drive closer to the right side. Sometimes at the entrance to the overpass there are so-called pockets, into which the transport turns from the adjacent road. If there is such a pocket, then you enter it, and for further rebuilding you act according to the rules. If you need to climb the overpass and immediately leave it, then you will reach the exit point without changing lanes on the right lane. If there is no pocket, then you need to skip the transport going along the main road.
Step 7
When exiting the overpass onto the main road, keep a close eye on the traffic ahead. Start looking around to let cars pass on the main road, only after all the cars have passed in front of you and you have taken the turn. Mistakes occur when the driver thinks that the car in front has started, starts moving himself and turns his head to the side. At this moment, the car in front of him can brake sharply.
