The bumper is the most vulnerable place in any car. Each driver hit the curb at least once, after which, of course, there was a need to go to a car service or to a friend's at a service station and leave the car for several days so that your bumper was repaired. However, few people realize that the bumper can be repaired by yourself. We will teach you how to do it.
Necessary
special hair dryer, paint, varnish, polishing wheel
Instructions
Step 1
Repairing a bumper is actually not as difficult as repairing the same door or fender of a car, since bumpers are made of special plastic that deforms very easily at high temperatures. When a crack appears, you first need to prepare the surface of the bumper for further processing, for this, wash it thoroughly so that there is no dirt left. This is very important, because particles of earth or sand can then cause a new crack in the bumper, after it has been covered with paint and varnish.
Step 2
After you have completely prepared the surface, you can start the next step. You need to heat the bumper with a special car hair dryer until it can be glued. After that, you need to carefully connect the broken part of the bumper, while it is important to make sure that the parts are well connected to each other.
Step 3
The last step is the final surface treatment, sanding, after which the paint layers can be applied. When the paint is completely dry, you need to apply several layers of varnish. When the varnish is dry, you can start polishing. To do this, you need to take a polishing wheel, moisten it and start the polishing process. You need to continue it until you get a perfectly flat surface.
