Even in the recent past, in order to charge a storage battery, it was necessary to periodically control the charging process, increasing or decreasing the current required for careful and at the same time full recharging of the battery. The chargers of that time had a very modest functionality in comparison with modern similar devices.
It is necessary
Access to a 220 volt electrical outlet
Instructions
Step 1
Currently on sale you can buy a starting and charging device produced under the Kedr trademark. The device is designed for recharging lead-acid starter batteries with a voltage of 12 volts. The time required for a full charge depends on the capacity of the battery and the degree of its discharge.
Step 2
In addition, in addition to its main purpose, "Kedr" is capable of recovering batteries by desulfating plates with an active mass, on the condition of which the battery life depends. To start the recovery process, a battery is connected to the device, and the “Cycle” mode is activated on it, after which the battery charging and discharging modes are alternated in automatic mode.
Step 3
For regular recharging of batteries, the “Automatic” function is provided, the name of which speaks for itself. I connected the battery, turned it on, and nothing more is required from the owner. After bringing the battery charge level to normal, the device automatically switches to low-current charging mode.
Step 4
For accelerated charging of the battery, "Kedr" has a function of intensive, prestarting mode of operation, generating an increased current (up to 10A).
Step 5
On the front panel of the device, there are indicators that inform the owner about the current mode of operation. If the "Automatic" indicator began to pulsate, this indicates a full set of capacity by the rechargeable battery.
