One of the most economical and convenient means of transportation in urban environments is a scooter. It consumes very little fuel and allows you to get around in heavy traffic on the roads. Thanks to its compact size, the scooter is very easy to operate. However, some owners have a problem during the repair of their iron horses, because parts can be bought only knowing the exact model of the scooter.
It is necessary
- - Screwdriver Set;
- - camera;
- - computer with Internet access;
- - cotton gloves.
Instructions
Step 1
Carefully study the documents that come with the scooter. In them you will definitely find the exact model and modification of this two-wheeled vehicle.
Step 2
If you don't have documents for the scooter at hand, you can try to identify the model by its appearance and plastic plumage. Go to the manufacturer's official website. There you will see photos and characteristics of the entire scooter range. Find your scooter using the comparison method.
Step 3
There are quite a large number of scooters that have a similar appearance, but different filling. That is, different manufacturers and models have identical cases. In this case, determine the exact model from the markings on the individual spare parts.
Step 4
Remove the saddle from the scooter, find a yellow or white plate under it. It indicates the model with the modification, as well as the manufacturer and specifications. If the plate is dirty, it should be cleaned with a semi-hard brush and some kind of cleaning solution. At the same time, be very careful not to peel off the paint with which the data on the plate is applied.
Step 5
Some manufacturers write the model abbreviation on the dashboard. Also, the model can be calculated by the tidy itself, since different models of the boards differ in such parameters as color, the maximum size of the speed scale marking, the location of the scales relative to each other.
Step 6
Remove the gear cover, which is located near the rear wheel under the air filter. To do this, unscrew all the screws that secure the cover to the body. Under it you will find a mark, embossed on the metal, which means the number of the piston system. The first four characters are the scooter model.
Step 7
Find the frame number of your scooter. Usually it is located under the plastic plumage, which must be carefully removed by unscrewing all the screws and disconnecting the fasteners. The first four characters duplicate your scooter's model name.
Step 8
If you can't identify your scooter on your own, take several photos of the device from different angles and post them on a special forum dedicated to two-wheeled vehicles. Experienced forum users will be able to help you figure out the model.
Step 9
Contact a special organization that will conduct an examination and give you an opinion. It will accurately indicate the model as well as the markings for each unit of your scooter.
