The main part of chips, cracks, scratches and "cobwebs" on the windshield of a car appears while driving. And according to the rules of the road, it is forbidden to drive a car with a damaged windshield. Therefore, the damaged glass must be replaced.
It is necessary
New rubber band, key cord, silicone cream, rope (long) and new windshield
Instructions
Step 1
First, you need to carefully pull the new sealing gum over the contour of the new glass.
Step 2
Then, in a special groove located on the outer side of the seal and intended for attaching the glass to the window frame of the car, it is necessary to lay the existing long rope. The edges of the body frame should be smeared with silicone, as this will facilitate installation.
Step 3
After that, you need to attach the windshield to the frame and press it down.
Step 4
Then it is necessary that one person from the passenger compartment pulls the rope out of the groove, and the second, in parallel with this, presses the glass from the outside. After that, the seal is firmly fixed in the frame of the car.
Step 5
After installing the glass, you need to put the so-called "lock" of the windshield. Due to it, the seal is pressed against the frame and does not allow moisture to enter the car interior. When installing the "lock-key", do not use sharp objects, because they can cut through the sealing rubber.
