The key parameter of any internal combustion engine is its displacement, measured in liters. The specified value has a direct impact on the power developed by the motor. And the more powerful the engine, the more dynamic the car and the higher the driving comfort.
It is necessary
- - machine for boring cylinder blocks,
- - a new piston group.
Instructions
Step 1
It makes no sense to bore a new engine, except for those cars that are preparing to participate in sports competitions. In all other cases, the cylinder block is bored out during the overhaul of the power unit.
Step 2
Due to the fact that the cylinder block is bored on special industrial equipment, during the preliminary preparation for this process, the engine is dismantled from the engine compartment of the machine.
Step 3
After fulfilling this condition, the motor is completely disassembled, and then a defect is performed on all the parts from which it was recently assembled.
Step 4
The "exposed" engine block is delivered by auxiliary transport to the workshop to a specialist in the boring of the specified parts. The foreman, after researching and performing the necessary measurements of the inner surfaces of the cylinders of your block, will give recommendations for purchasing a repair piston group of a certain size, which, after purchase, is delivered to him in the workshop.
Step 5
After boring the cylinder block, the engine is assembled, after which the overhaul of the engine is considered complete, and as a result of the repair, the power unit is endowed with an increased displacement and acquires increased power.
