The body structure of modern cars produced at the Volga Automobile Plant is equipped with removable front fenders. This greatly facilitates the repair of the machine associated with the replacement of these parts in the event of damage to the fenders as a result of careless actions of the owner or other road users.
It is necessary
- - 10 mm spanner,
- - ratchet wrench,
- - extension for the wrench,
- - cardan for the crank.
Instructions
Step 1
The procedure for replacing the front fenders on the bodies of VAZ 2108-115 cars has its own features inherent only to the indicated models.
Step 2
At the first stage of the body repair, the hood rises, under which the support strut is installed. If a protection is installed on the car under the wing, then it is dismantled.
Step 3
Further, in cases where it is necessary to change the left fender, the steering wheel turns to the left. If the right wing changes, the steering wheel turns to the right.
Step 4
Under the hood, in the side drain, the four bolts of the upper front fender attachment are unscrewed.
Step 5
Then the lower mounting bolts are unscrewed: one at the front, the second at the back.
Step 6
Find two more bolts under the wing, they can be "hidden" under a layer of dirt that attach the part to the A-pillar, they also need to be unscrewed.
Step 7
By unscrewing all eight mounting bolts, the front fender is successfully removed from the body.
Step 8
The turn signal repeater is reinstalled on a new wing, after which all actions related to the installation of a new wing are performed in the reverse order.
