Summer heat forces drivers to look for ways to fight, aimed at reducing the degree of heating of the air in the car. The positive effect pursued by the set goals is achieved by self-tinting of the side windows of the car body.
It is necessary
Tinting film, scissors, detergent, water
Instructions
Step 1
It is not difficult to cover the flat surface of the side window with tint film. The only condition in the course of this work is the absence of various litter in the form of dust and grains of sand in the water and on the surface of the glass.
Step 2
At the first stage of performing tinting work, it is necessary to make templates for the subsequent cutting of a self-adhesive tinting film. The projection of the glass, intended for subsequent pasting, is removed on ordinary paper, and then similar in size patterns are cut out of the film - blanks.
Step 3
The glasses are washed with a detergent diluted in water, after which they are washed under running water and laid out on a flat surface.
Step 4
Then the glass surface is abundantly wetted with an aqueous solution containing a small amount of liquid detergent (50 g of detergent per 10 liters of water). Further, the protective layer is removed from the pattern intended for toning, and it is carefully applied to the glass surface.
Step 5
Strictly aligning the edges of the film with the glass, use a soft rag to avoid scratches on the film, remove the remaining moisture from under it. And after one and a half to two hours, the glass can already be installed on the regular places of the car body.
