How To Put On Car Covers

Table of contents:

How To Put On Car Covers
How To Put On Car Covers

Video: How To Put On Car Covers

Video: How To Put On Car Covers
Video: How to put on and take off a car cover 2024, November
Anonim

Car seat upholstery needs to be protected from damage, so covers are a must. In addition, this is a great opportunity to keep the cabin clean. The surface of the covers will absorb most of the dust and dirt. Cleaning this accessory is much easier than changing the car seats.

How to put on car covers
How to put on car covers

Necessary

set of car covers

Instructions

Step 1

The classic car seat cover is a pair of front seat items, a passenger sofa cover and cover, five headrest items and hook fasteners. Unpack the kit. Perform initial identification to ensure all parts are in stock. To do this, lay out the products on the seats as they will later be put on.

Step 2

Pay special attention to the head restraints - the rear ones on some car models are smaller than the front ones. Although on visual inspection, they are the same. Attach the side elements of the head restraints to each other to understand this. Determine their back and front. The front tends to be very curved. Having decided on the details, proceed to putting on the covers.

Step 3

Car seat covers are easier to put on the front seats first. Slide the seats forward all the way to make it easier to work. Remove the headrest and place the cover on the top of the chair. Carefully smooth out the folds of the fabric. Look under the chair and look for the auxiliary elastic bands located along the edge of the product. Connect them with hooks.

Step 4

Place the cover over the headrest by gently pulling on the fabric. Slide it back into place. Do the same manipulations with the second front seat.

Step 5

Remove the seat before placing the cover on the rear sofa. To do this, pull the part upward with force to release the latches that hold it. On the removed seat, put on the cover of the cover, carefully pulling the elastic bands. Secure them with auxiliary hooks.

Step 6

Put the covers on the head restraints after removing them from the back. Fold the back of the sofa inside the cabin until it stops and put a cover on it. Secure it carefully with the auxiliary hooks. Replace the backrest and slide the headrests back into place. Then return the seat to its proper place.

Recommended: