Sometimes a situation arises when the front doors of the car are blocked, and the keys to them are in the car. Or there was a malfunction in the operation of the central lock, and there is no way to get inside.
Necessary
- - spare set of keys;
- - cellular telephone;
- - 2 wooden shovels;
- - camera;
- - pump;
- - steel wire or wiper blade.
Instructions
Step 1
If you slammed the keys in the car, but you have a spare kit at home, call your household on your mobile phone and ask them to find a spare car key. Get up no further than 30 cm from the car, without disconnecting the cell phone, at this time the person with the spare kit must press the unlock, having previously brought the key to the switched on cell phone. The car door will open.
Step 2
If the central locking fails, remove the car from the alarm. Basically, this function is not affected by a broken lock. Provided that the car is equipped with a remote start, start it with the key fob. Take 2 wooden kitchen spatulas, carefully insert one between the B-pillar and the top of the driver's door, and place the other spatula under the first. Gently wedge the door open, spreading the shoulder blades in different directions to form a small gap. You can use another handy tool, preferably a wooden one, so as not to damage the body coating. In the resulting gap, place a folded cardboard box, between the sides of which slide a long steel wire. Using the wire, try to get the power window button (this will be easier when the car is running) or the central locking button.
Step 3
Open the front door through the car window. To do this, make a gap between the glass and the base of the door, so thick that steel wire can pass through. Do not use a screwdriver, it may scratch the glass. Take the chamber and pump, slide the chamber into the slot and pump it up. Insert a wire into the resulting gap, with which you try to hook the leash of the lock drive. This way you can open the door. In the absence of a wire, you can use a janitor. Remove the knitting needle from it and bend one end with pliers to make a hook, follow the procedure described above.
