Before installing a child seat, be sure to read the manufacturer's instructions. Every car seat manufacturer conducts many different studies to ensure maximum safety. The mounting system does not imply the use of unnecessary parts.
Instructions
Step 1
A rear-facing child seat must not be placed in the front seat if the airbags could be deployed there. Most often, the pillow is simply turned off, but this function is not available on all cars. It is highly discouraged to install in this place a chair located in the direction of travel. The fact is that the pillow has a great recoil force when opening. It is calculated for an adult passenger, and a child can be inflicted with various kinds of injuries.
Step 2
The seat is recommended to be installed in the back seat. It is much safer for the child to be there than in front. The safest place in the car is the middle of the rear seat.
Step 3
It is best to secure the chair with three-point belts. The stably positioned seat ensures maximum safety. The chair must be secured tightly. The backlash should not be more than two centimeters. When installing the 0+ Car Seat, make sure that the straps are not tangled. The belts must be in place.
Step 4
Quite often there are cases when there are short belts in the car. In this case, the parents decide that only the lap belt can be used. It is very dangerous. It is necessary to solve this problem as soon as possible. In any car service, belts are replaced with longer belts. Never press down on the car seat with the back of the front seat. If an accident happens, the back can break, and it is unlikely to benefit the child in the chair.
Step 5
When installing the seat, be sure to pay attention to the mating part of the car belt. There should be no contact of the constriction with the parts of the chair. If an overload occurs, the belt may unfasten. Care must be taken not to twist the belts. The inner straps of the chair must be tightened tightly.
