After accidents, dents often remain on the body of a car. Then the question arises: "how to get rid of them?" There are several ways to remove a dent on the body of your car.
Instructions
Step 1
You can go to a car service, where they will fix everything with a 100% guarantee and in the best possible way.
Step 2
More recently, a chemical method of pulling out dents has appeared. To do this, it is necessary to thoroughly heat the damaged surface with a hairdryer for thirty seconds. Then cover the trail of the accident with liquefied carbon dioxide (or simply carbon dioxide). Hold the gas container with the neck down. After a few minutes, the dent will heal. You just have to wipe the body with a rag.
Step 3
The next method is the effect of gradual heating to high temperatures and sudden cooling. One of the basic laws of physics works here: bodies expand when heated, and contract when cooled. The method does not require mechanical action on the dent.
Step 4
There is also an innovative method that has appeared not so long ago. It significantly saves time and cost of repairs. The method is based on the effect of elevated temperature and compressed air in combination with vacuum suction cups on the damaged area. As a rule, after the car goes through this procedure, not a trace of the former dent remains on it.
Step 5
Finally, the defect can be corrected using folk methods. One of them is the method of pulling out a dent using coins. It is used in places where the metal is especially thin. First you need to clean up the damaged area. Then a round, copper or bronze coin must be soldered to the stripped area, which in turn is soldered to a piece of the welding electrode. Then with pliers it is necessary to clamp this electrode and pull out the dent. The coin is then removed by heating the metal.
