If it is cold in your car in cold weather, and the stove does not help at all, then you can improve the heating yourself. Additional sources of heating are currently very popular.
Instructions
Step 1
You can install a pre-heater on the car. They are also called autonomous water heaters. The preheater must be installed in the engine compartment. Connect it to the on-board electrical system, the fuel supply system, and the vehicle's cooling system. Fuel will be drawn from the system and burned in the combustion chamber. At this moment, the liquid in the heat exchanger is heated. The pump then pumps this fluid in a large circle. As a result, the standard heating radiator heats up faster. The heater fan will blow hot air into the vehicle interior.
Step 2
There are heaters with an electronic unit and a remote control. On such systems, you can set the turn-on time, duration of operation, as well as power modes. The automatic mode is also available to the user. The heater at this setting will itself change the power according to the temperature parameters.
Step 3
The pre-heater is well suited for cars with a weak standard stove. Quite often, problems with engine warming up arise due to a malfunction of the thermostat. He should not immediately let the liquid go in a large circle. Also pay attention to the stove radiator. If it is very dirty, then warm air will blow very weakly into the passenger compartment. If the system is completely functional and there is not enough heat, then it is recommended to install a heater.
Step 4
The additional heating system also includes heated seats, heating of diesel fuel and washer fluid. Of course, these devices are very useful, but not every driver can afford such a pleasure. The cost of seat heating together with the installation can be compared with the cost of liquid heaters, and the efficiency from it is noticeably lower. The cost of heating diesel fuel is slightly higher than the cost of an autonomous heater.
