Interior heating, especially for domestic cars, leaves much to be desired. And not because the stove heats badly, but because there are cracks around, and the warm air instantly evaporates. In old cars, the stove starts to warm up the interior poorly due to the fact that all the pipes in it are clogged with oily deposits. In order to improve heating in the car and to feel comfortable even at the lowest temperatures in winter, a number of measures must be taken to ensure and retain heat.
Instructions
Step 1
If the car is old, then it is enough to replace the heating system or remove and flush it so that the temperature in the passenger compartment corresponds to normal mode. Disconnect the stove, disassemble it, wash it in a degreasing agent, gasoline, kerosene. Screw everything back in reverse order. Even this measure will help warm up the interior to the required temperatures.
Step 2
When all the tubes in the stove are tightly clogged and it is not possible to rinse them, then buy a new stove of the corresponding model and install.
Step 3
Also, to improve the heating of the cabin, you can install additional stoves. Especially if the car is large and the standard heating does not cope with heating the interior.
Step 4
In Gazelle and Sable cars, all sealing gums are so poorly fitted, as if cars were created for a trip to African countries. If you do not insulate the car and seal all the cracks, then even installing 10 additional stoves in the cabin will still be cold.
Step 5
Installed stoves need to be configured correctly. Car service specialists will help you with this.
Step 6
Also, for the winter period, the intake of cold air should be removed. To do this, disconnect the cable from the control lever and fix the shutters in the fully open position. The tap on the heaters must be set to the maximum open position.
