Owners of Soviet cars know that their interior is very cold. Correct thermal insulation of the Zhiguli will correct the situation. At the same time, it is advisable to complete it even before the onset of severe cold weather, in order to meet the winter fully armed.
It is necessary
- - felt;
- - glue;
- - double glass;
- - double sided tape.
Instructions
Step 1
Among Zhiguli cars, the most successful models are recognized as "nine" and "ten". Heat leakage from the interiors of these cars is due to the large cracks in the luggage compartment and doors. Therefore, to insulate them, it will be enough to process the door seals with silicone grease and change the sealing gum on the trunk.
Step 2
As for the rest of the brands of Zhiguli, you will have to spend a lot more time and effort to insulate them. In this case, it is necessary to start work on insulating the interior with the mandatory removal of the rear and front seats, as well as the ceiling and front panel.
Step 3
Now you can cut patterns on the ceiling from the heat-insulating material of your choice, which is best used as felt. Before fixing the insulation, treat the surface of the ceiling with glue, the choice of which must be approached with all responsibility, since the result of the work done depends entirely on its quality. You need to glue the insulation carefully. Otherwise, poorly adhered thermal insulation material may cause condensation to form on the inside.
Step 4
Next, insulate the backs of the rear seat, and then glue the front shield that separates the passenger compartment and the engine compartment. At the end of the interior insulation, the bottom of the car is pasted over with heat-insulating material. After the glue is completely dry, you can strengthen the removed parts of the car interior.
Step 5
To make the Lada warmer, the thermal insulation of just one cabin will not be enough, so you need to take care of the thermal insulation of its glasses, which will avoid the formation of frost on their surface. The installation of double glasses on the windshield and side windows will help to solve the problem. To do this, it is best to buy the same glass that you have in your car. At the same time, it is not at all necessary to purchase it in stores, since double glass can be bought hand-held for half the price.
Step 6
If you feel sorry for spending your money on the purchase of such glass, then you can make it yourself. To do this, cut out the rectangles or squares that you need from the most ordinary glass, and fix them from the outside. Do not forget about the spacer between the two glasses, which you can use double-sided tape, a piece of plasticine or an eraser. This is necessary to maintain a tight seal between the two glass elements.
