The car radios are encrypted against burglary. Every time after the car network is de-energized for at least 10 minutes, your radio will require you to enter a code. But what if you don't remember the code, but the card is lost with it?
It is necessary
In order to decode the car radio yourself, you need to have Internet access, as well as know the model, manufacturer and serial number of the radio
Instructions
Step 1
There are several decoding options. Here is one of the simplest: you just need to go to the dealer and he will tell you the code. However, one must remember that no one will do this for free. After all, your car radio will need to be removed and installed back. And you will also have to pay for this procedure. For an average foreign car, such a decoding operation will cost about 3,000 rubles.
Step 2
There is also an alternative way. Moreover, it is also cheaper. Try to decode the car radio yourself. The mountings are the same on almost all foreign cars. Remove the top plug yourself, then unscrew the top screws. Then do the same for the bottom plug and screws.
Step 3
Now comes the most crucial moment! You need to pull out the radio without disconnecting the wires. Try to find the serial number on it. Rewrite it on a piece of paper. Check the model of your radio, as well as its manufacturer.
Step 4
Then on the Internet you need to find a calculator designed specifically for this radio model. Write your serial number on it. The online program will calculate the lost code for you.
Step 5
Now all that remains is to enter this code into the radio tape recorder. Once again, you can listen to your favorite music in the car. In this method, it is noteworthy that it will take only about 40 minutes to remove and install the radio tape recorder, as well as to search for a calculator on the Internet. In addition, you will save several thousand rubles.
