Many young people own scooters. It is a very convenient and economical means of transportation. On a scooter, you are not afraid of city traffic jams of many kilometers. Gas mileage is amazingly low, which will save you money. Many people want to make their scooter unique and modify it - for example, install neon on it.
It is necessary
neon, diode tape, transparent garden hose, wires, fasteners, button
Instructions
Step 1
Before installing, thoroughly wash your scooter from dirt and dust. Also decide on the place where you will install neon. An enclosed space, such as a garage, is best suited for this purpose. You can also do the installation by rolling the scooter home. Place it on a step or stand. Turn off the ignition and remove the negative lead from the battery.
Step 2
Neon must be purchased in advance from the store. You can buy a regular one - for installation under the bottom of the car. Such neon is an elongated rigid tube that is protected from external factors. You can buy flexible neon lights, but you will need to protect them further. There is also another option for lighting - buy a diode tape and a transparent garden hose. The tape must be placed in the hose and carefully soldered, thereby protecting it from external influences. The good thing about a diode tape is that it is inexpensive and has a lot of colors. You also need to buy a button, wires and fasteners.
Step 3
Lay the scooter gently on its side so that the bottom is accessible. Choose a place to install the neon. Secure it carefully. Now you need to bring the wires from the neon to the battery terminals. It is best to partially disassemble the scooter skin and hide the wires under it to protect them from moisture. The button must be carefully installed on the steering wheel and the wires must be connected to it. It is also recommended to install a fuse. After that, assemble the scooter skin, connect the terminals to the battery and check the performance of the neon.
