How To Count Errors On Opel

Table of contents:

How To Count Errors On Opel
How To Count Errors On Opel

Video: How To Count Errors On Opel

Video: How To Count Errors On Opel
Video: How to count errors Opel Astra H Как считать ошибки Opel Astra H 2024, November
Anonim

The appearance on the dashboard of an Opel car with an icon depicting a car and a wrench indicates a malfunction in one of the systems. During the warranty period, error reading and troubleshooting is done at the dealership using the Tech 2 scanner, but there is another method provided by the manufacturer.

How to count errors on Opel
How to count errors on Opel

Instructions

Step 1

If your vehicle is equipped with a manual transmission or MTA Easytronic, your actions will be as follows. Sit in the driver's seat. Do not insert the key into the ignition switch, this is very important.

Step 2

Press the accelerator and brake pedals at the same time. Step on the pedals and check that the limit switches are engaged. You will learn about this by the characteristic click, which will be heard when you apply strong pressure on the pedals.

Step 3

Keeping your feet on the pedals, insert the key into the ignition and turn it, but do not start the engine. After a few seconds, the odometer display will show ESN (error code number) and an error code consisting of five or six digits instead of the mileage.

Step 4

If there are five digits, add a zero to the indicated number to identify the error. For example, if the number 70405 appears on the display, then the error code is 070405.

Step 5

If the system has recorded several errors, their codes will be displayed one after another, and the end of the list will be shown as a number consisting of six zeros. If you see only zeros on the display, then the system has not recorded any errors.

Step 6

To read error codes on an Opel car with an automatic transmission, first insert the key, turn it in the ignition switch (without starting the engine), then depress the brake pedal all the way.

Step 7

Move the automatic transmission selector to position D (drive), turn off the ignition by turning the key in the opposite direction (do not remove it from the lock), and release the brake pedal.

Step 8

Press the brake and accelerator pedal together, turn on the ignition by turning the key, but without starting the engine. Hold down the pedals until ECN and an error code appear.

Step 9

After you find out the digital error code, decipher it using special tables, which can be found at the links https://mmc-dion.narod.ru/kod.html and

Recommended: