Before going through a technical inspection, many drivers think about removing the tinting from the windows of their car. In a car service you can be charged 400-500 rubles for this simple procedure. Why pay money if you can wipe the tinting yourself and spend almost nothing?
Necessary
- - a razor blade or a very sharp knife;
- - water;
- - rag;
- - means for washing car windows.
Instructions
Step 1
Tinting is the thinnest film glued to the glass of a car. To remove it, take a razor blade or a very sharp knife, pick up the film by the edge and, making sharp movements, remove the tint. Keep the razor parallel to the glass, making sure to press down firmly enough. Be careful - it is very easy to cut yourself. You can work with thick leather gloves, if that's convenient for you. Spray cleaned areas with water during the process.
Step 2
If the tint film was on an adhesive base, then there will be traces of this sticky substance and, most likely, the film itself on the glasses. They must be wiped off. Take a sharp knife, wet the glass with water (it is better to use a sprayer for flowers), and start scrubbing off the remnants of glue and pieces of tinting. Keep the knife tilted. The angle should be approximately 45 degrees. Swipe the knife from top to bottom, periodically wetting the glass. Be careful not to scratch the glass. Watch for the sound of the knife. If it starts to grind violently, then you have scratched the glass. It is better to immediately polish the micro-scratch.
Step 3
No matter how thoroughly you ttiralitoning, there will still be glue in the microcracks. Therefore, the glass should be washed. Take a soft cloth, dampen it in the detergent solution and carefully wipe the cleaned glass. Achieve complete transparency. Dry the glasses with a dry cloth. If necessary, apply anti-fogging and anti-freeze agent to them. When finished, you can safely go for a technical inspection - your glasses are clean and transparent, and you have saved money and time.
