Car repair is a troublesome and not quick business, especially if you have to repair it yourself and for the first time. Suppose that you need to remove the wings, consider the sequence of actions.
Instructions
Step 1
Part one (in the pit) To remove the rocker, you must alternately disconnect the exhaust system and the transmission control rod.
Step 2
Disconnect the exhaust system first. Of course, it is not necessary to disassemble and remove it completely, but if you are doing it for the first time, then it is advisable to choose a simple method, if you understand it, then it is enough to disconnect the front pipe from the exhaust manifold, disconnect the suspension cushions of the system in the area of the exhaust gas converter.
Step 3
Then comes the drive rod of the gearbox control. Need a head and a key. Remove the nuts from the bracket with the head (we also remove the bracket), then unscrew the bolts that hold the rod.
Step 4
Part two. Go to the salon Pull the buckles on the lever cover, remove the lower holder and pull the entire cover up the lever until it is completely removed.
Step 5
Remove the lining (box) and the noise insulation cover that is under it. Next, unscrew the nuts that secure the slide to the base. The wings are removed. Now you just need to lower it down through the opening and it is yours.
Step 6
It is worth adding that in practice, when removing the backstage, some points may differ from you, because there are a lot of brands and models of cars. But in general, the whole procedure will look like this.
