A car gearbox (gearbox) is a device with which the vehicle speed is regulated, and also reverse. There are mechanical and automatic transmissions, as well as a robotic transmission. Many cars are equipped with 3, 4 or 5 speed manual transmissions, which are enclosed in a crankcase. Removal of the gearbox and its subsequent installation is carried out on a lift or inspection pit.
Instructions
Step 1
Stock up on the tools you need to work: keys, screwdrivers and patience. It is better to carry out the operation to remove the gearbox with someone, one cannot master this procedure.
Step 2
Disconnect the negative battery cable. Then remove the air filter, all wire connectors, as well as the clutch release cylinder and the coolant reservoir.
Step 3
Unscrew the starter mounting bolt located at the top. Now remove the mounting bolts and disconnect the transmission from the engine. Remember to remove the wheels and mud screens. After that, you will need a lift or a viewing ditch.
Step 4
Move under the engine and drain the oil from the gearbox, then unscrew the bolts with which the gearbox is attached to the engine, after removing the exhaust pipe. After you have disconnected the gearbox, then check the clutch elements, and, if possible, replace them with new ones. Inspect all shafts and gears for external visible damage.
Step 5
Do not press the clutch pedal when carrying out the operation to remove the transmission. Before assembling the gearbox, replace all old and worn-out parts of the car, install new gaskets under all covers and thoroughly coat everything with sealant. Reinstall the box in reverse order.
