First, you need to understand why you need to flush the nozzles. Interruptions in engine idling, noise, loss of power, increased fuel consumption, uncertain engine start - all this can be the result of poor injectors. And they start to work badly because of poor-quality fuel and lack of engine care.
Instructions
Step 1
The main reason for the poor performance of the injectors is the deposition of various gasoline compounds in the area of the shut-off device. You can get engine problems even after 30,000 km. And for all the ensuing problems, you need to periodically flush the nozzles.
Step 2
The best way to flush the nozzles is to turn to a professional service that has all the equipment you need. But there are ways in which you can clean them yourself.
Step 3
The first way: the most affordable and simple, which attracts car owners. Its essence is that a cleaner is poured into the gas tank. The car must be driven on this mixture for some time. This will give some positive results, but only if the cleaner is good and the nozzles have just started to get dirty.
Step 4
Second way. Your engine is connected to a stand - a tank with a cleaner and runs in this mode for about an hour. This method is much better because the tank and filter will be clean, but there is no way to check if all the nozzles have been cleaned.
Step 5
Third way. You can clean the nozzles using ultrasound. With this method, you should dismantle the nozzle and apply ultrasound to it in a special bath. The nozzle is then rinsed and checked. But with repeated cleaning with ultrasound, the insulation loses its properties, and the turns can be closed. Ultrasonic cleaning should not be done more than 2 times.
Step 6
Draw your own conclusions: the nozzle flushing procedure has a positive effect. The car will increase its top speed and reduce noise. Engine starting should also improve. Thus, prevention is necessary and many times better than expensive engine repairs.
