It is more convenient to replace the starter on the engine in the inspection pit or on the lift. But if this is not possible, then it can be replaced in the usual conditions of a private garage. Before carrying out work on the repair of the electrical equipment of the car, first of all, it is necessary to disconnect the power from the battery.
Necessary
13 mm spanner
Instructions
Step 1
In the engine compartment, all electrical wiring connected to the starter is disconnected from the starter. Using a 13 mm wrench on the solenoid relay, unscrew the nut securing the power cable coming from the battery, which is also disconnected and moved to the side.
Step 2
Next, the engine crankcase protection is dismantled from below, and using a 13 mm wrench, the three bolts attaching the starter to the car engine are unscrewed.
Step 3
After that, the starter is dismantled, and a new or repaired one is installed in its place, while the installation process is carried out in the reverse order.
