During the operation of a VAZ 2112 car, the rear window wiper brush wears out much more intensively than the front wipers. There is nothing unusual about this kind of wear. Because all sand and other contaminants, including particles of fuels and lubricants lifted from the surface of the road surface by the wheels of cars, during precipitation, are deposited mainly in the rear of the car, due to the aerodynamic properties of the car body.
Necessary
Ignition key
Instructions
Step 1
The worn-out rubber of the windshield wiper ceases to cope with the functions assigned to it, as a result of which the rear window is not sufficiently cleaned of dirt particles adhering to it, which leads to a certain degree of discomfort when driving in bad weather, and also reduces the level of driving safety due to limited visibility.
Step 2
It would seem that it could be easier than removing the brush and replacing the elastic insert in it, but this procedure baffled many car owners.
Step 3
Although the attachment is identical to that of the front windshield wiper blades, there is one aspect to be considered when removing the rear wiper. It is removed from its original place only when the brush holder is located at an angle of approximately 45 degrees with respect to the horizon.
Step 4
It is necessary to turn on the rear window wiper drive in advance, and then, turning the ignition on and off, by turning the key in the ignition lock, set the brush in the required position.
Step 5
Then it can be removed easily and simply by simply pressing the locking latch from below.
