How To Adjust The Carburetor Vaz

Table of contents:

How To Adjust The Carburetor Vaz
How To Adjust The Carburetor Vaz

Video: How To Adjust The Carburetor Vaz

Video: How To Adjust The Carburetor Vaz
Video: Уровень топлива для карбюратора ОЗОН. ПРАВИЛЬНАЯ УСТАНОВКА! 2024, November
Anonim

After long-term operation of the car for several years, especially after an overhaul of the engine, it is advisable to replace the carburetor of the gasoline engine power system.

How to adjust the carburetor vaz
How to adjust the carburetor vaz

It is necessary

  • Stethoscope,
  • screwdriver.

Instructions

Step 1

It is only natural that after installing new equipment, it needs to be adjusted. This task is performed as follows:

- on a muffled engine, the screw for the amount of fuel is screwed in completely, after which it is unscrewed by 2, 5 turns.

Step 2

The engine starts, and the screw of the amount of fuel supply, rotating it in both directions, sets the most stable engine speed.

Step 3

Then, after turning off the engine, the second candle is unscrewed, and a stethoscope is screwed in its place. The mirror of the stethoscope is adjusted so that the color of the flame in the cylinder is visible.

How to adjust the carburetor vaz
How to adjust the carburetor vaz

Step 4

The engine is restarted and the fuel mixture quality screw needs to achieve a blue flame when the fuel mixture burns in the cylinder. At the same time, setting the engine idle speed in the range of 800-1000 rpm.

Step 5

Having achieved, by turning the adjusting screws in both directions, stable and uninterrupted operation of the engine, as well as a blue flame in the carburetor cylinder, turning off the engine, the stethoscope changes to a spark plug.

Recommended: