Insulation of the VAZ 2107 car interior has a beneficial effect on traffic safety. The driver feels comfortable behind the wheel, the windows of the car stop fogging up. In order not to find yourself in a cold car on a rainy day, you need to prepare it for winter in advance.
Necessary
- - screwdriver;
- - a set of rubber seals;
- - sealant;
- - Scotch;
- - foil foil heat insulator 3mm.
Instructions
Step 1
Get rid of drafts first. Deformation of low-quality rubber seals of domestic production in the VAZ 2107 car leads to the fact that it ceases to keep heat and "exhales" air. To check the tightness of the car, go to the car wash.
Step 2
Check the interior after going through an external wash. Note where and in what places in the cabin water has accumulated. The presence of water indicates that the interior of the car does not hold moisture, which means that there is also a problem of thermal insulation.
Step 3
Don't waste time gluing or otherwise rescuing old rubber seals. They won't work anyway, and the cabin will be cold again. Buy and install a new kit, which will cost you 300-400 rubles.
Step 4
Turn on the stove and test its operation in different modes. In case of malfunction, take care of the radiator. Disassemble the torpedo, remove the glove compartment and dashboard. Dismantling the radiator is not an easy job, but its timely replacement or high-quality restoration with the help of a sealant will add 5-6 degrees of heat to the car in the winter cold.
Step 5
Remove carpets and pads and re-install the floor with pre-selected insulation. Please note that cheap insulation materials have poor performance characteristics. In addition, they have a disgusting odor, because they tend to absorb moisture and odors in the cabin. Experienced drivers recommend 3mm foil foam insulation. This material solves several problems at once. In addition to the function of insulation, it also does an excellent job of sound insulation.
Step 6
Next, proceed with the insulation of the doors. Remove the cladding and polyethylene vapor barrier. Take penofol and start cutting the insulation pads. It is possible to use a prepared template. Attach the spacers to the tape. Note that you also need to cut holes for the handles and levers and reinforce the thermal insulation around them. Reinstall the door trim. Check the movement of the power window handles.
Step 7
If all of the above methods fail, install a seat heater. This device does not solve the issue of thermal insulation of the passenger compartment in general, but it perfectly improves well-being, warming both the driver and the passenger on rainy days.
