Auto
Last modified: 2025-01-22 17:01
Motorists are often faced with such a problem as corrosion. And they know that anti-corrosion treatment in car services is expensive. Therefore, it is quite understandable why there was a desire to do this work on their own. Necessary Means and devices for washing a car, anti-corrosion agents
Last modified: 2025-01-22 17:01
In the conditions of the Russian climate, cars are more susceptible to corrosion and metal destruction. To protect the body, you can make an anticorrosive. Anti-corrosion can be done on absolutely any machine, regardless of the country of manufacture
Last modified: 2025-01-22 17:01
By purchasing a car, we expect that it will serve us faithfully for a long time. Alas, like any other metal product, the car is subject to corrosion. Therefore, it needs anti-corrosion treatment. Instructions Step 1 New cars are usually pre-treated with anti-corrosion protection at the factory, but additional treatment will not interfere with them
Last modified: 2025-01-22 17:01
Dross are iron oxides that form on the surface of hot rolled steel. The scale is bluish-black. Before painting steel products, the scale must be removed, because the application of paint to the scale is difficult due to the minimal adhesion and high brittleness of the scale
Last modified: 2025-01-22 17:01
Normal vehicle operation is impossible without a well-functioning starting system. When adjusting the electric start system of a car engine, it is necessary to observe the correct connection of the battery to the circuit containing the starter and the traction relay
Last modified: 2025-01-22 17:01
Volga cars have long been famous for their cozy and spacious interior. However, the radiator of the stove, thanks to which the interior becomes warm so quickly, often fails or becomes unusable. Therefore, it must be changed periodically. Necessary - new heater radiator
Last modified: 2025-01-22 17:01
When changing the oil in the classic model of an automatic transmission (automatic transmission), several well-known methods are used: partial replacement, replacement and replacement of fluid at a special stand. Of these, the first is the most accessible and safe
Last modified: 2025-01-22 17:01
Modern automatic transmissions do not require oil change or refilling throughout the entire period of operation. For this reason, there is no filler neck in their body. In old-style boxes, there is a need for periodic oil changes, prescribed in the instructions for the car, and this procedure is significantly different from changing the engine oil
Last modified: 2025-01-22 17:01
The air filter of the car has sealing gum around the entire perimeter. In this case, the air passing through it is first cleaned, after which it enters the mass air flow sensor (MAF) and only after that into the engine. According to the instructions, the air filter must be changed every 30 thousand km
Last modified: 2025-01-22 17:01
In order for any car, including the Ford Focus, to function properly, it needs regular maintenance. Replacing the air filter is one of its essential procedures. If this is not done, too little air will enter the mixture, which will lead to a drop in power and excessive fuel consumption, and dust particles will contribute to rapid engine wear
Last modified: 2025-01-22 17:01
In high-tech engines of modern cars, half of the engine will need to be disassembled to replace spark plugs, so it is not recommended to start this procedure without some preparation. It is better to do this at a service station. Replacing candles in a conventional engine does not present any particular difficulties, which absolutely any car enthusiast, both experienced and a beginner, can handle
Last modified: 2025-01-22 17:01
Correct functioning of the spark plugs determines the engine's recoil efficiency. The sequence of actions when replacing them in a Subaru Impreza car depends on the presence of a turbocharging system in the model. Necessary - candle key
Last modified: 2025-01-22 17:01
The clutch mechanism in the design of the power plant of the car serves to transfer torque from the engine to the transmission units, due to which the movement starts and the speed gains. And if any of the two disks, master or slave, fails, then the car will lose the ability to move independently, despite the flawless operation of all units and the engine
Last modified: 2025-01-22 17:01
The service life of the clutch on VAZ cars is determined not so much by mileage as by the features of operation and driving style. A sporty driving style, urban rhythm with constant traffic jams, mountain roads, congestion of the car - all this reduces the traction resource
Last modified: 2025-01-22 17:01
Replacing the clutch on a VAZ-2108 car is performed when the drive or driven disc is destroyed. To carry out the work, you will need an inspection pit or overpass, since you need to remove the gearbox. Necessary - keys set; - jack
Last modified: 2025-01-22 17:01
Despite the huge number of cars on the road, not all drivers know what alignment means, why this operation is required and when it is carried out. RS is a procedure for checking and adjusting the installation angles of the wheels relative to the road and direction of travel
Last modified: 2025-01-22 17:01
An automatic transmission (AKP) is easy to operate, does not require additional efforts while driving. Such a box independently switches speeds on uphill and downhill and determines the optimal driving mode in various situations. Instructions Step 1 Before turning on any speed in the automatic transmission and starting to move, make sure that the engine is warmed up to a temperature of 50 degrees
Last modified: 2025-01-22 17:01
Camber is the angle between the wheel and the perpendicular to the road. If the angle is set correctly, it provides stable grip and good handling. Instructions Step 1 First, look for signs that you really need to perform camber adjustment
Last modified: 2025-01-22 17:01
Almost any car service has the latest equipment for wheel alignment. Moreover, the procedure is performed very quickly. However, going to the workshop for every possible symptom of a malfunctioning system would be too wasteful. Moreover, there are methods that allow you to check the condition of the car yourself, without risking either the wheels or your wallet
Last modified: 2025-01-22 17:01
When buying a parking radar, or parking sensors, you need to decide on the model of this device. Parking sensors are now very often included in the standard equipment of a new car. It is convenient - there is an opportunity to check this device on the spot
Last modified: 2025-01-22 17:01
If you don't feel very well the dimensions of your car, the parking sensors installed on the front and rear bumpers will help you. Sensors in the front bumper will help you maintain a safe distance. And when parking, you will know the distance to the subject to control the situation
Last modified: 2025-01-22 17:01
Situations in which it becomes necessary to start the car without a key are not so rare in the life of an ordinary motorist. After all, both the key itself and the ignition lock breaks. To cope with a breakdown, you need to know the general principles of the car's components
Last modified: 2025-01-22 17:01
If there is a need to weld the car body, then this work can be entrusted to professionals from the car service, since welding requires not only extensive experience, but also the necessary equipment, both for welding and for further painting and painting work
Last modified: 2025-01-22 17:01
Depending on the size of the damage and the general condition of the body, it is partially or completely repaired. Partial repairs are carried out when the body is in good condition, when its individual parts need to be repaired. A complete overhaul is necessary for major overhauls, or when most of the body parts are damaged
Last modified: 2025-01-22 17:01
Each vehicle model has its own instructions for the assembly and disassembly of the main components. The bumper can be removed by removing just a few screws and clips. This whole procedure takes about half an hour. Necessary - set of screwdrivers
Last modified: 2025-01-22 17:01
The bumper often does not need to be removed. As a rule, its dismantling is necessary for replacement, if it has been damaged quite badly, or for cosmetic repairs. Kia Spectra is a car that has become practically popular, since it has a number of advantages
Last modified: 2025-01-22 17:01
A common reason for the generator's failure to generate electricity for the "life support" of the on-board systems of the car, in most cases, lies in the weak belt tension or in the unacceptable wear of the graphite brushes. To restore its performance, it is enough to tighten the drive or replace the current-collecting parts
Last modified: 2025-01-22 17:01
The bearings of the front wheel hub of a car are always subjected to enormous loads while driving, which are intensified many times when driving on a poor-quality road surface. For this reason, the front hub bearings wear out more often than other parts of the machine
Last modified: 2025-01-22 17:01
The brake drum is removed from the VAZ 2106 car to replace it if the working surface is damaged or worn out, as well as to monitor the condition of the brake mechanisms and to replace the brake pads and working brake cylinders. Necessary -keys "
Last modified: 2025-01-22 17:01
The need to remove the drum usually arises when the brake cylinder fails. At first glance, this task does not pose any difficulty for a seasoned car enthusiast, so many car owners prefer to remove the drum on their own, without contacting a car service
Last modified: 2025-01-22 17:01
When talking about an engine overhaul, the first thing that comes to mind is cylinder bore. As the cylinders get slightly larger, the next oversize pistons must be used. But there are still many units that need to be replaced during repairs
Last modified: 2025-01-22 17:01
On a Chevrolet, you need to change the fuel filter every 45 thousand kilometers, regardless of the age and total mileage of the car. Work can be done in your garage, spending just a couple of hours of free time. The fuel filter can be changed even in the field
Last modified: 2025-01-22 17:01
The Exhaust Gas Recirculation (EGR) system is designed to reduce the content of nitrogen oxides in the vehicle's exhaust gases. In case of contamination and failure of the EGR valve, the car can stall at idle, consume more fuel. In order not to waste time and money on repairing this system, you can simply plug the valve
Last modified: 2025-01-22 17:01
The fuel filter on the Mazda 3 plays a huge role in the operation of the car engine. Its main task is to trap various particles of dirt, water and rust. Such contamination appears when refueling fuel, especially if it is of poor quality. The fuel filter requires timely replacement, which increases engine life and has a positive effect on the operation of the vehicle as a whole
Last modified: 2025-01-22 17:01
"To light a cigarette" means to connect the power wires from the discharged battery to the working battery of someone else's car. Car enthusiasts are often faced with the fact that the battery has run out and has ceased to ensure the operation of the engine and the entire electrics of the car in a given mode
Last modified: 2025-01-22 17:01
A car battery is a reliable thing and does not fail for a long time. But if you listen to music for a long time with an inoperative engine or turn the starter on a flapping engine for a long time, he may sit down and refuse to start the car
Last modified: 2025-01-22 17:01
Every person is different. The individuality of people is externally manifested through clothing, as well as accessories and items that accompany a person. One of the important subjects in the life of a modern person is his car. The car is chosen based on their criteria of prestige and practicality
Last modified: 2025-01-22 17:01
Any car enthusiast, depending on his financial capabilities, can outweigh the car interior. This can be done in a specialized car dealership, or you can do it yourself. If you decide to drag the salon with your own hands, some skills and knowledge are required
Last modified: 2025-01-22 17:01
Upholstering the car interior with leather or other material transforms the entire interior of the car, and also increases the pleasure of being behind the wheel. You can drag the salon yourself without paying extra for the service to professionals
Last modified: 2025-01-22 17:01
The leather-covered car interior looks stylish and elegant. It features improved sound insulation and acoustics. The likelihood of extraneous sounds, squeaks, vibrations is significantly reduced. You can cover the interior with leather on your own, giving the car accuracy and originality